VOLIA — Homecast

HOMECAST

Note:
insert your smart-card in the slit “chip-down”

1. Press MENU on your remote control.

2. Using vertical arrows, select Installation in the main menu and press OK. If the message «Please enter PIN» appears, enter 0000 or your code.

3. Using vertical arrows, select «Delete settings»

4. Press OK.

5. In the new menu «Type of deleting», Using vertical arrows, select «List of channels» and press OK.

6. Menu “Installation” will appear

7. Using vertical arrows, select «Manual search»

8. Press OK

In the Manual Selection menu, set search parameters using vertical arrows to move from one parameter to another. Press OK

Frequency	290000 (press numbers on the remote control)
Symbol Rate	6875 kS/s (press numbers on the remote control)
Const.	64-QAM or Automatic (select QAM Modulation, then select 64-QAM or Automatic using horizontal arrows)
Invert	Automatic or Off (select Inversion, then select Automatic or Off using horizontal arrows)
Network	On (select the setting using horizontal arrows)

The signal is there if you can see the indicators at the bottom of the screen Signal Level and Signal Quality.

10. Press OK and wait till search is over

11. In the menu “Save changes?” press Yes

12. press OK.

13. Press MENU button to exit.

14. Make sure the channel list is complete in accordance with your contract.

Instructions for tuning Homecast
tuner-homecast-eng.doc, 22 КБ