VOLIA — Kaon

KAON

Note:
Insert you smart card in the slip chip-down.

1. Press MENU on your remote control.

2. Using vertical arrows, select Edit Channel Lists in the main menu and press OK.

3. If the message «Please enter PIN» appears, enter 0000 or your code.

4. In the new menu Edit Channel List (TV), select TV in the title, using the TV/RADIO button on the remote control and press the red button.

5. The list appears

6. Using horizontal and vertical arrows, select Delete and press OK.

7. The right column title should change to Delete.

9. Select channels to be deleted using vertical arrows and confirm it each time by pressing the OK button.

In the Delete column you should see a list of channels to be deleted (to delete all TV channels, move all channels from the left column to the right one).

To send all channels to the Delete column, press green button.

10. When all channels have been moved, press MENU on the remote control. In the dialog box Record? press OK.

11. Using vertical arrows, select Manual Search in the Main Menu and press OK.

12. If you see the box Menu Code. Enter PIN Code, press 0000 or your code.

13. In the Manual Selection menu, set search parameters using vertical arrows to move from one parameter to another.

The signal is there if you can see the indicators at the bottom of the screen Signal Level and Signal Quality.

Search parameters

Frequency	290000 (press numbers on the remote control)
Symbol Rate	6875 kS/s (press numbers on the remote control)
Const.	64-QAM or Automatic (select QAM Modulation, then select 64-QAM or Automatic using horizontal arrows)
Invert	Automatic or Off (select Inversion, then select Automatic or Off using horizontal arrows)
Network	On (select the setting using horizontal arrows)

14. Press OK. Once channel search is over, a list of channels will appear indicating the number of TV and radio channels found.

15. Press OK.

16. Press OK again, the dialog box Record? shows up

17. Press OK.

18. After saving the channels you have found, press the Exit button on the remote control 3 times until the decoder switches to the channel viewing mode.

19. Make sure the channel list is complete in accordance with your contract.

Kaon User Manual
tuner-kaon.doc, 30 КБ

Kaon User Manual
tuner-kaon.pdf, 1,1 MБ