Samsung
Option 1. Primary decoder setup.
Once the decoder is on, you will see the following picture on the TV screen:
| Adjustment | |
| Select Language | English |
| Frequency | 290000 kHz |
| Symbol Rate | 6875 kS/s |
| Time Zone | +2:00 |
| Confirm | |
In the Frequency line, change 114 000 to 290 000 (using vertical or horizontal arrows or numbers on the remote control).
Using the vertical arrow, select Confirm and press OK.
A message will appear: «Installing…Please wait». When tuning is complete, the decoder will switch to the channel viewing mode.
Make sure the channel list is complete in accordance with your contract.
Option 2.
Press MENU on your remote control.
Select Adjustment and press OK.
If you see the message «Please enter PIN», enter 0000 or your code.
In the submenu, select Scan (using vertical arrows on the remote control) and press OK.
In the submenu, adjust search parameters using vertical arrows to move from one parameter to another.
| Frequency | 290 000 (dial on the remote control) |
| Symbol rate | 6875 kS/s (dial on the remote control) |
| Modulatio | 64-QAM or Auto (using horizontal arrows on the remote control) |
| Network Search | Yes (using horizontal arrows on the remote control) |
The signal is there if you can see the indicators at the bottom of the screen Signal Level and Signal Quality.
Press OK. Once channel search is over, a list of channels will appear indicating the number of TV and radio channels found. Press OK.
After saving the channels found, press the Exit button on the remote control 3 times until the decoder switches to the channel viewing mode.
Make sure the channel list is complete in accordance with your contract.
tuner-samsung.doc, 35 kB



